Case Studies
Knauf Insulation products and solutions are used in
numerous projects. Some of the most interesting and challenging
case studies are listed below.....
So why is insulation so important in your self-build project?
With the wide range of insulation products available, which should you use?
The Building Regulations have serious implactions for your project - especially how it is insulated.
So just how is the government intending to ensure homes of the future are sustainable?
Aberdeen’s Malcolm Allan Housing and TCD Architects have created three hundred houses in sought-after Westgate, a beautiful countryside location outside the market town of Inverurie. The development comprises fourteen styles of residential
Specialist sustainable development architect, the ZEDfactory and contractors Midas were required by their client, property developers, Robotmother Ltd, to come up with a stone mineral wool solution to fully fill cavity walls in the Jubilee Wharf, Penryn,
More than 1,350m2 of Knauf Insulation’s Kalzip roll was used in the curvaceous roof – the naturally curved sheets being roll-formed on site to give a continuous 45m sheet length across each bay. Kalzip Roll was also used on the roof of the air traffic
Knauf Insulation supplied over 100 tonnes of their Rocksilk Krimpact Flat Roof Slab Extra at 150mm (2x75mm), a consistent, high density rock slab with superior impact and compression resistance. This material is designed to offer not only the
By marrying together Polyfoam extruded polystyrene rigid board insulation with the Slimline membrane, Knauf Insulation has delivered a straight-forward solution to a problem bugging the industry – that of water finding its way into protected membrane
In phase one of the Upton project, developers Mansells Construction specified 5,200m2 of Knauf Insulation's Crown DriTherm Cavity Slab 32 for use in 300mm cavities, using two layers of 100mm thickness and one layer of 75mm thickness. Crown DriTherm