Description
Rocksilk Krimpact Panel Slab is a consistent density,
compression resistant, rock mineral wool slab. It has comparable
compression resistance to a mineral wool lamella product, but is
much more cost-effective.
Rocksilk Krimpact Panel Slabs can be produced with a compressive
strength of 70 to 100 kPa and are made to order.
Krimpact™ technology realigns the mineral wool fibres during
manufacture to increase impact strength without dramatically
reducing thermal performance - making an ideal product for use in
composite panels.
Furthermore, Krimpact™ technology achieves a consistent density
slab. This ensures better long-term compressive strength, high
impact resistance, better thermal performance and a thinner,
lighter product compared to other high-strength insulation
options.
Application
Rocksilk Krimpact Panel Slab is specifically for use as the core
of fire resistant composite panels.
Standards
Rocksilk Krimpact Panel Slab is made from non-combustible,
inorganic rock wool, defined as mineral wool in BS 3533: 1981 and
is manufactured in accordance with BSI Quality Assurance Standard
BS EN ISO 9001: 2000.
Fire Performance
Rocksilk Krimpact Panel Slab is classified as Euroclass A1 BS EN
ISO 13501-1. Rocksilk Krimpact Panel Slab can be used up to an
operating temperature of 850°C. In the event of fire it will emit
negligible quantities of smoke and fumes. The heat emission from
the product is insignificant.
Durability
Rocksilk Krimpact Panel Slab is non-hygroscopic, odourless, rot
proof, does not sustain vermin and will not encourage the growth of
fungi, mould or bacteria.
Environmental
Rocksilk Krimpact Panel Slab is free from CFCs, HCFCs and any
other material with ozone depletion potential in its manufacture
and content and represents no known threat to the environment.
Rocksilk Krimpact Panel
Slab’s manufacture has a low impact on the environment and is
classified as Zero ODP and Zero GWP.
Handling and Storage
Rocksilk Krimpact Panel Slab is easy to handle and install,
being lightweight and easily cut to size.
Rocksilk Krimpact Panel Slab is supplied in polythene packs,
stacked on pallets for temporary protection during transit.
For longer term outside storage the pallets should be stored
under a secure waterproof covering.
Product Data
| Thickness (mm) |
Thermal conductivity
(W/mK) |
Compressive Strength
(kPa) |
Maximum Slab
Size(mm) |
| To order |
0.038 |
70-100 |
3600 x 18001 |
1 Krimpact Panel Slab can be made to order in any
size up to this maximum size.
All dimensions are nominal