ThermoShell - EQUALISER

A silicone resin façade paint designed for the over-coating of mineral renders

Description

A silicone resin façade paint designed for the over-coating of mineral renders to provide uniformity to any differences in the shade of the surface due to drying.

Application

Cover and mask all elements that may come into contact with the ThermoShell (TS) - EQUALISER. Protect background from weather ensuring that the surface is dry and free from dirt and dust. Protect from strong direct sunlight that may cause excessively quick drying. Ensure the background has dried sufficiently prior to application.

Check the colour and batch numbers of all the containers and test for correctness of hue by a trial coat. If applying more than one container to a elevation then mix first in a clean receptacle.

TS-EQUALISER can be applied by roller/brush or through specific airless spraying technology. Apply thinly and evenly, without overlapping wet on wet. Due to the colour / texture of the surface the TS-EQUALISER is being applied to, it may be necessary to apply in 2 coats. If application is in 2 coats then the first coat can be diluted by a maximum of 10% and the second coat by a maximum of 5%. For airless application then dilute by a maximum of 5%.

• High vapour permeability
• Resistant to algae and fungal growth
• Highly water repellent
• Economical
• Structure preserving
• Suitable for most substrates

• Product Datasheet
• CoSHH Datasheet

Do not carry out works if the air or surface temperature is 5º C and falling.

TS-EQUALISER is formulated to inhibit the development of soiling/contamination (algae/fungal growth), however this is dependent upon local factors/prevailing site conditions and building design.

If the background is of a significantly different colour to the required covering then please use TS-SELF CLEAN.

All ThermoShell products should be installed by an approved ThermoShell installer.

Safety at work

Avoid contact with skin and eyes. In case of contact with the eyes rinse immediately with clean water and seek medical advice.

Please refer to the TS-EQUALISER Safety Data Sheet for further information..

Environmental

TS-EQUALISER possesses no contents that are ecological hazards and therefore represents no known threat to the environment.

Handling and storage

TS-EQUALISER is supplied in 12.5 litre buckets and should be stored in its original container. Shelf life of 24 months, subject to cool frost free storage.

Product Data