Description
A dry powder mix mineral finish render available in 1.5, 2, 3
and 5mm grain sizes. Using different tools and techniques, a
variety of textures can be achieved from a light floated appearance
to a heavy rustic finish.
Use in conjunction with ThermoShell (TS)
- SELF CLEAN for a superior long lasting finish.
Application
Cover and mask dirt sensitive elements such as glazing. Protect
background from weather ensuring that the surface is dry and free
from dirt and dust. Backgrounds should be treated first with
TS-PRIMER M and allowed to dry for 12
hours before application
Ensure that the same batch numbers are being used for areas of
coloured render. Mix the contents of the bag with approximately
6.25 litres of clean water (1.5mm grain) and approximately 6.8
litres of clean water (2mm grain and above) to a lump free
consistency, re-stir after 15 minutes.
Apply the TS-MINERAL to the thickness of the grain using a
stainless steel trowel and texture using a plastic / rubber /
sponge or stainless steel float. Always work to a wet edge to avoid
dry lines and protect from the weather.
Do not carry out works if the air or
surface temperature is +5ºC and falling. Do not apply TS-MINERAL
where the surface is likely to be exposed to rain before the
product has dried.
Wash all equipment and tools immediately after use.
All ThermoShell products should be installed by an
approved ThermoShell installer.
Safety at work
Mineral renders exhibit an alkaline reaction upon contact with
water and therefore may cause skin irritation or eye damage. Avoid
contact with skin and eyes. Wear eye / face protection. In case of
contact with the eyes rinse immediately with clean water and seek
medical advice.
Please refer to the below Safety Data Sheets for further
information:
Environmental
TS-MINERAL possesses no contents that are ecological hazards and
therefore represents no known threat to the environment.
Handling and storage
TS-MINERAL is supplied in 25kg bags and should be stored In a
dry moisture protected environment. Shelf life of 9 months, subject
to cool frost free storage.
Product Data
| Grain
Size (mm) |
Installed
Weight (kg/m2) |
Coverage
(m2/Bag) |
Number per pallet |
| 1.5 |
2.3 |
10.8 |
42 |
| 2.0 |
3.2 |
7.8 |
42 |
| 3.0 |
3.8 |
6.5 |
42 |
| 5.0 |
5.0 |
5.0 |
42 |
The above figure are approximate and will vary dependent upon
the background.
Figures based upon a smooth background. For rough backgrounds allow
for 10% extra usage.