ThermoShell - REINFORCING MESH

Description

A high quality coated glass fibre mesh for use with the Knauf External Wall Insulation system and renders.

Application

ThermoShell (TS) - REINFORCING MESH should be trowel applied into the fresh render, leaving it just below the surface of the render. All edges should be overlapped by a minimum of 100mm to prevent surface cracking. There should be no straight joints within the mesh.

TS-REINFORCING MESH can be cut down to approximate 500mm x 300mm stress patches and embedded above and below the angles of openings (ie windows / doors) to help prevent stress cracking. This application is carried out prior to the reinforcing of the whole façade.

All ThermoShell products should be installed by an approved ThermoShell installer.

Safety at work

TS-REINFORCING MESH has no known safety issues or harmful effects.

• Impact resistant
• Reduces risk of cracking
• Mechanically stable
• Non combustible
• Dimensionally stable
• Chemical resistant
• Corrosion resistant

• Product Datasheet

Environmental

TS-REINFORCING MESH possesses no contents that are ecological hazards and therefore
represents no known threat to the environment.

Handling and storage

TS-REINFORCING MESH is supplied per roll, wrapped or boxed dependent upon quantities. Store uncompressed and in dry conditions.