ThermoShell - RENDERPRIME

Description

ThermoShell (TS) - RENDERPRIME is background preparation render for use on substrates with a compressive strength of >= 6N/mm. Suitable for rough and smooth concrete, brick / blockwork, stonework and old masonry.

Application

Clean down background to remove any dust, dirt or any matter which will impair the bonding of the render, using a high pressure water jet where necessary.

For insufficiently strong backgrounds fix a suitable metal mesh lathing with a 100mm lap.

For smooth or rough concrete or background with a high or variable suction, pre-wet and allow the water to drain off.

Apply TS-RENDERPRIME by hand or machine to a full bond thickness of 5mm and leave for 24 hours before continuing work with appropriate Knauf Insulation render. For plinth areas allow 1 week prior to continuing works.

• Dry and pre-mixed
• Low chromate content 
• Good adhesion
• Quick drying
• Machine or hand application
• Suitable for plinth areas

• Product Datasheet
• CoSHH Datasheet

For areas of stonework / rough rubble spray the TS-RENDERPRIME in a criss-cross pattern achieving approximately 50% coverage.

Protect from weather and do not carry out works if the air or surface temperature is 5ºC and falling.

Wash all equipment and tools immediately after use.

All ThermoShell products should be installed by an approved ThermoShell installer.

Safety at work

Mineral renders exhibit an alkaline reaction upon contact with water and therefore may cause skin irritation or eye damage. Avoid contact with skin and eyes. Wear eye / face protection In case of contact with the eyes rinse immediately with clean water and seek medical advice.

Please refer to the TS-RENDERPRIME Safety Data Sheet for further information.

Environmental

TS-RENDERPRIME possesses no contents that are ecological hazards and therefore represents no known threat to the environment.

Handling and Storage

TS-RENDERPRIME is supplied in 25kg bags and should be stored In a dry moisture protected environment. Shelf life of 6 months, subject to cool frost free storage.

Product Data