ThermoShell - SELF CLEAN
Description
A premium silicone resin façade paint with self cleaning
technology to reduce the adherence of
dirt particles.
Application
Cover and mask all elements that may come into contact with the
ThermoShell (TS) - SELF
CLEAN. Protect background from weather ensuring that the surface is
dry and free from dirt
and dust. Protect from strong direct sunlight that may cause
excessively quick drying. Ensure the
background has dried sufficiently prior to application.
Check the colour and batch numbers of all the containers and
test for correctness of hue by a
trial coat. If applying more than one container to a elevation then
mix first in a clean receptacle.
TS-SELF CLEAN can be applied by roller / brush or through
specific airless spraying technology.
Apply thinly and evenly, without overlapping wet on wet.
- High vapour permeability
-
Resistant to algae and fungal growth
- Highly water repellent
- Extensive range of colours
- Suitable for most substrates
Due to the colour / texture of the surface the TS-SELF CLEAN is
being applied to, it may be necessary to apply in 2 coats.
If application is in 2 coats then the first coat can be diluted
by a maximum of 10% and the second coat by a maximum of 5%. For
airless application then dilute by a maximum of 5%.
Do not carry out works if the air or surface temperature is +5ºC
and falling.
TS-SELF CLEAN is formulated to inhibit the development of
soiling / contamination (algae /
fungal growth), however this is dependent upon local factors /
prevailing site conditions and
building design.
All ThermoShell products should be installed by an
approved ThermoShell installer.
Safety at work
Avoid contact with skin and eyes. Wear eye / face protection In
case of contact with the eyes rinse immediately with clean water
and seek medical advice.
Please refer to the TS-SELF CLEAN Safety Data
Sheet for further information.
Environmental
TS-SELF CLEAN possesses no contents that are ecological hazards
and therefore
represents no known threat to the environment.
Handling and Storage
TS-SELF CLEAN is supplied in 12.5 litre buckets and should be
stored in its original container. Shelf life of 24 months, subject
to cool frost free storage.
| Coats
(mm) |
Coverage (l/m2) |
Coverage
(m2/bucket) |
Number per pallet |
| 1 |
0.17 |
73.5 |
32 |
| 2 |
0.25 |
50.0 |
32 |
The above figure are approximate and will vary dependent upon
the background.
Figures based upon a smooth background. For rougher backgrounds
allow for approx 30% extra usage.