ThermoShell EWI - Classic
Colour Chart
Make a colourful statement
The range allows the rejuvenation of tired
looking buildings, enhancing the look and the value of property and
giving you the freedom to make your project into a work of art.
You can choose from over 200 colours and four
shades of white, allowing you to bring individual personality to
the property.
The Knauf Insulation range of high performance paints includes
the silicone technology behind TS-Equaliser, an everyday superior
coating with a long life span before maintenance and the new
technology involved in TS-Self Clean.
For the possibility of colour matching existing BS and RAL
numbers, please contact the technical department.
The colour shades in this brochure are a reference and may
differ depending on the product, the way in which the painted
surface reflects light, as well as the processing and drying
conditions because of this, differences in the colour shade may
occur. It cannot be guaranteed that the shades shown in these paper
samples are identical to the finished product.
Due to the natural raw materials that are used, there may be
differences between the shade of the finishing coat and the colour
of the paint.
We always recommend
that you paint a test area. We recommend you should order all of
the material for a particular object in one go; this avoids any
deviations in the colour shade when additional material is ordered
later on. We cannot accept any claims in respect of colour
differences after application.
Coloured mineral finish renders shall be finished with a
coat of colour equalization paint in line with best practice.
The technical leaflets corresponding to the respective products
must be observed.
Please note that TS-Mineral Render should not be used with the
ThermoShell EWI system if the light intensity of the colour
is below 20.
Classic Colour Chart
Shades available for:
Light Intensity
The light intensity of the topcoat render corresponds to the
depth of colour that product has. The lower the number the darker
the product. When used with the ThermoShell EWI system guidance
must be sort from the technical department regarding the conformity
of such products due to excessive thermal gain.
|
Light Intensity Factor (L) |
ThermoShell(TS) Render |
|
L 20 and above
|
TS-Mineral 1.5mm and above
TS-Silicone any size grain
|
|
L15 to L19
|
TS-Silicone all grain sizes
small areas only
|
|
L10 to L14
|
TS-Silicone 2mm and above
small areas only
|
NOTE:
Colour deviations between the
depicted colour pattern and our colour gamut may arise owing to the
printing process and shall not give grounds for
complaints.
Downloads